| 产品特性：- | 是否进口：否 | 品牌：斯米克 |
| 型号：D802 | 焊芯直径：3.2/4.0/5.0mm | 订货号：- |
| 货号：- | 牌号：d802 | 类型：堆焊焊条 |
| 材质：1029101538 | 药皮性质：碱性焊条 | 直径：3.2/4.0/5.0mm |
| 长度：350mm | 焊接电流：--A | 电流幅度：--A |
| 熔点：- | 工作温度：常温℃ | 适用范围：耐热、耐蚀、耐磨。堆焊高温工件如热剪切刀刃 |
| 硬度HRC：-- | 是否跨境货源：否 |
 |
| Category类 别Trade-Mark牌 号Equivalent to China Standard相当国标Characteristics & application特性和用途Equivalent to AWS相当AWS Hard-surfacing硬面 堆 焊 D 667EDZCr-B-15HRc≥48. Resistance to wear, gas corrosion and oxidation. Hardfacing of blast furnace hopper and cracker part.HRc≥48，耐磨、耐气蚀、抗氧化。堆焊高炉料钟、破碎机件 D 802EDCoCr-A-03HRc38-47. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as the edge of thermo-cutter.HRc38-47，耐热、耐蚀、耐磨。堆焊高温工件如热剪切刀刃ECoCr-AD 812EDCoCr-B-03HRc45-50. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as internal-combustion engine valve.HRc45-50，耐热、耐蚀、耐磨。堆焊高温工件如内燃机阀ECoCr-BD 822 HRc≥53. Resistance to Wear and heat, bad shock resistance. Hardfacing of rotating blade wheel of boiler.HRc≥53，耐热、耐磨，但抗冲击性差。堆焊锅炉旋转叶轮 D 832EDCoCr-C-03HRc≥50. Wear and heat resistance. Hardfacing of high temperature part such as hot-rolling guided way.HRc≥50，耐热、耐磨。堆焊高温工件如热轧导轨ECoCr-CD 842EDCoCr-D-03HRc28-38. Corrosion and thermo-fatigue resistance, work harding. Hardfacing of hot forging die.HRc28-38，耐蚀、抗热疲劳，具有加工硬化性。堆焊热锻模 Cast iron 铸 铁Z 308EZNiPure nickel, excellent general properties. Used to weld thin cast iron part and repair welding machined surface, such as guided way of machine tool.纯镍，综合性能好。铸铁薄件及加工面补焊用，如机床导卫ENi-ClZ 408EZNiFeIron nickel, high strength and excellent ductility. Repair welding of important gray cast iron and nodular cast iron, such as cylinder cap.镍铁，强度高、塑性好。重要灰铸铁及球铁焊补用，如汽缸盖ENiFe-ClZ 508EZNiCu-1Copper nickel, good machinability and bad crack resistance. Repair welding of sand hole and gray cast iron machined surface subject to no load.镍铜，易加工，但抗裂性较差。不受力的灰铸铁加工面及砂眼补焊ENiCu-B Copper alloys 铜 合 金Cu 107ECuRed copper, atmosphere and sea water corrosion and excellent electric conductivity. Welding of red copper such as electrical copper row.紫铜，耐大气，海水腐蚀，导电性好。紫铜焊接用，如导电铜排ECuCu 207ECuSiSilicon bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.硅青铜，耐蚀、强度高。铜、硅青铜及黄铜焊接用ECuSiCu 227ECuSnBTin phosphor bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.锡磷青铜，耐蚀、强度高。铜、硅青铜及黄铜焊接用ECuSn-CCu 237ECuAlAluminum bronze, wear and corrosion and high strength. Welding or surfacing of copper alloys.铝青铜，耐磨、耐蚀，强度高。铜合金焊接或堆焊用ECuAl-A2 Aluminum alloys 铝合金Al 109TAlPure aluminum, excellent corrosion resistance and middle strength. Welding of pure aluminum.纯铝，耐蚀性好，但强度不高，纯铝焊接用E1100Al 209TAlSiSilicon aluminum, good crack resistance and wide range of usage. Welding of aluminum alloys other than aluminum magnesium alloys.铝硅，抗裂性好，通用性大。铝合金焊接用，不宜焊接铝镁合金E4043Al 309TAMnManganese aluminum, corrosion resistance and high strength. Welding of aluminum alloys.铝锰，强度高，耐蚀。铝合金焊接用E3003 Nickel alloys镍合金Ni 102ENi-1Pure nickel. Welding and surfacing of nickel and nickel to steel.纯镍，用于镍、镍与钢的焊接与堆焊ENi-1Ni 207ENiCu-7Copper nickel. Welding and surfacing of copper nickel and copper nickel to steel.镍铜，用于镍铜、镍铜与钢的焊接与堆焊ENiCu-7 |
